• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement UPVC Door Handles

You can find the perfect handle for your door, whether replacing your existing handles or adding additional security. Upvc handles are simple to fit and comply with the required 92mm centres for multipoint locks.

The most important measurements to be considered are the backplate fixing centers and key hole dimensions and levers. Check these carefully against your existing marks before ordering.

Lever/Pad

Lever pad door handles consist of an elongated lever handle on one side and a paddle-shaped handle on the other. They are intended for use with key wind locks. However they can be affixed to multipoint split spindle door locks.

Our range of upvc handles lever pads are available in a range of finishes. They will be displayed in the drop-down menu after you have selected the correct handle for your doors. Some styles of handles for double glazed doors are not available in all finishes. You should always check the technical drawing and size sections for the specific product you are looking for to ensure that you get the correct size and fit.

It is crucial that when selecting a new set of Upvc lever pad handles, they match the PZ (distance from the spindle of the handle to the center of the hole in the cylinder) of your multipoint door locks. This is because the handles need to be aligned in order to ensure that doors stay locked, no matter if you're looking from the inside or from the outside. Our handles are designed to fit a wide range of standard cylinders, however it is always worth double-checking before purchasing.

You'll need to take off the handles on your current handle and remove the lock case if you're upgrading to dual spindle handle levers as this will require a split cylinder inline. You can purchase these separately. We have included a diagram of the technical aspects in the images of each product.

Once you have removed the screws that hold your existing door handle it is a good idea to loosen them, and then inspect the mechanism to determine what condition it is in. You may have to loosen the screws even more in the event that they are not tight. After that, you can take off the spindle and handle and replace it with a new door handle made of upvc. It is essential to ensure that the handle is in the proper position before screwing it into place. You can do this by placing your finger between the door frame and the handle to ensure that it is level.

Lever/Lever

Lever door handles operate a multi point lock using an euro lock handles Cylinder and can be found on most upvc double doors, aluminium window handle doors, and some wooden doors. They come in two forms, having an interior lever and a paddle on the outside. Sprung - They have an internal spring cassette within the backplate to help to bring the handle lever into the horizontal position. Non-sprung: These do not have a mechanism for bringing the handle lever to a horizontal angle.

To fix a door handle lever that is sagging it is necessary to locate the detent access pin or hole. It's usually an insignificant hole or protruding ring or rectangular located on the handle base plate. Once you have located it, loosen the set screw using the help of a screwdriver, and then remove it to release the lever, allowing it to return to its horizontal position.

After the handle is set horizontally, it is possible to reinstall the screws. Close them to ensure that the handle stays attached to the base plate. It is also advisable to apply a threadlocking adhesive solution to the threads of the screw to increase the grip and prevent them from loosing over time.

There are a variety of reasons why lever door handles slide. The most common reason is that the fixings are too tight, causing the lever bearing to get tangled up against the door. It could also be because the levers aren't being operated at a straight angle and this is causing the latch mechanism preventing it from fully springing back into action.

A common cause of spring levers that are not functioning properly is the spring not being in the right position on the backplate. The most effective way to determine this is to move the handle to see whether it changes to the horizontal position.

It is important to fix any door handles that are loose immediately. This could cause excessive wear on the screws, and the handle could fall off the base plate. It is also a good idea to tighten all screws that are loose regularly to help to prevent them from becoming loose.

Lever/Snib

These upvc door handles are also known as handle sets with a 'Snib' and have a snib lever at the top of the lever that you can push down to lock your door in the event that you don't use an dummy lock. They usually come with a Fullex 68PZ (that's 68mm between the spindle centre and lever or lock centre) door lock. We also have a selection of door handles 68PZ from manufacturers like Ferco and Fab & Fix.

Change your door handle is an inexpensive method to upgrade your home, regardless of whether you're replacing handles that are in use or fitting new ones on doors that you've built in your house. There are many styles of door handles made from upvc available, including traditional lever on backplate, curved or straight short latches, and knob handles with dummy handles for multi point locks, which are ideal for French doors.

Rose door handles are oval or circular versions of lever-on-backplate handles. These handles are identified by a lever or knob that is mounted on the backplate. The backplate is removable for concealed fixing.

These handles are available in a variety of finishes, including chrome and coloured finishes to complement your external door handles and locks and other hardware such as knobs, bolts and hinges. Some handles come with grub screw to attach the lever or knob firmly to the spindle. Some handles come with bathroom spindles, which can be used for bathroom locks. They also come with a thumbturn release mechanism and can be used on doors for bathrooms.

Mortise

The tubular latch is most likely to be the cause of this when your door handle made of uPVC is slammed shut. There could be a variety of factors that could cause this, the first being a simple lack of lubrication on the latch plate. This can be resolved easily by opening the door and spraying lubricant over the lock and handle. It could also be that the latch has slipped away from the backplate. This is a more complicated issue that requires the help of an expert.

A multipoint handle is the ideal solution for a stuck door handle. The handles are positioned through the faceplate and are operated by the use of a key or thumb turn knob that activates the cam that locks the deadbolt. The handles are available in a number of different sizes to fit various types of uPVC doors and come with a variety of attractive finishes to match the hardware you already have. The handles can be purchased via the internet or from an authorized locksmith in your area. They can be installed with clear instructions.

You will need to know your PZ size of your cylinder in order to select the right replacement upvc window handles handle set. This is the distance in millimetres between the inside edge of the door frame and the center of the hole for the handle. You'll also need the type of lock that is installed on your door, irrespective of whether it's a mortise lock or a hook lock. The easiest way to find the correct handles after you have the measurements is to use the filter for brands on the website. This will help you narrow down your options, and then you can select the appropriate size.

A typical handle set includes an arm with two screws of various lengths, drill guides, and installation instructions. The smart models, such as the Igloohome Smart Mortise 2+ comes with the complete mortice lock, which has a built-in keypad. These are more sophisticated devices that are for professional installers or highly competent DIYers. Certain handle sets come with a variety of accessories, including weather strips that can be used to enhance the appearance of the door.